Welcome to Our Website

Key generator 1 3ghz 8dbi patch antennas

1080MHz - 1200MHz Patch Antenna, +8dBi (L-COM RE1208P)

Omni-directional Antenna, 1.597GHz to 1.607GHz, 2dBi Gain, Linear Polarisation, SMD + Check Stock & Lead Times 10, 188 available for 3 - 4 business days delivery: (UK stock) Order before 19: 35 Mon-Fri (excluding National Holidays). 1.3ghz antenna, 1.3ghz antenna Suppliers and Manufacturers. DC-ANT-24DT - 2.4GHz Wi-Fi Whip, Straight RF Antenna 2. The antenna tracker is ready for mounting to any standard photography tripod.

  • 1.2GHz and 1.3GHz 8dBi FPV Flat Patch Panel Antenna SMA
  • 6dBi/ 8dBi @ Dual-Band 2.4/5 GHz Directional Antenna
  • Long Range FPV Patch Panel Antenna 1.2GHz to 1.3GHz 8dBi
  • 1.2-1.3Ghz Tx/Rx All infos on one page - updated: 27/10
  • 1.3GHz Optimized 8dBi Patch Antenna - RC Groups
  • 14dbi directional patch antenna 1.3ghz tuned 1280mhz fpv
  • FPV HUB FPV HUB 1.3ghz CP Patch Antenna
  • 1.3Ghz 8dBi patch antenna from hoby wireless - RC Groups
  • Beginners 1.3GHZ FPV Setup - RC Groups

ImmersionRC Limited – Pioneers in FPV Electronics

Tightly controlled radiation patterns for optimum coverage. Polycarbonate with Integrated Antennas. Zyxel offers a complete range of 2.4 GHz and 5 GHz antennas, cables and other accessories for Access Points to enable customized wireless deployments. Competitive prices from the leading RF Antennas distributor.

Cracked 5.8GHz Patch 8dbi Directional Antenna - ClearView Parts

To see other 1.2 - 1.3GHz antennas we carry please click here. 1 3ghz 8dbi patch antennas. Wireless Router Antenna Distance Coverage. The KP Performance KP-24-SPOMA12-8-RSP is a compact yet high performance 2.4 GHz omnidirectional WiFi antenna.

1.7 Ghz Grid Antenna Suppliers, all Quality 1.7 Ghz Grid

Order Item # REP-SM Now!

  • ##electronics IRC Archive for 2020-04-21
  • FT-RF, Antenna, Design, Manufacture -- 2.4 GHz
  • 2.3GHz 8dBi LTE Fiberglass Omni Antenna with 1 DIN
  • What Is Antenna Gain? And What are "dBi" and "dB"? Find
  • 1.280mhz 8dbi Patch Antennae Wanted - RC Groups
A Study of Signal Penetration Into Building Materials
1 Amazon.com: TP-Link 2.4GHz 8dBi Indoor Desktop Omni 81%
2 Product Families – MARS Antennas 58%
3 3G/4G antenna advice - Types, directional, MIMO, cables 24%
4 1.2/1.3 GHz Antennas: Hobby Wireless, Your Best Stop For 77%
5 All in one antenna, all in one antenna Suppliers and 13%
6 Amazon.com: Parts & Accessories 1.2GHz and 1.3GHz 8dBi FPV 33%

Serial number 1.3GHz Optimized 8dbi Patch Antenna - SMA Male

To see other - GHz antennas we carry please click here. Telemetry was captured via RFD900 with an 8db patch antenna. With the portable HUAWEI 4G Router 3 Pro, just. RP-SMA Female Pigtail Cable for Mini PCIe Card Wireless Routers, PC Desktop, Repeater, FPV UAV Drone and PS4 Build 4.4 out of 5 stars 410.

Activity code (PDF) A Dual Band Belt Antenna

MIMO Antennas for sale, Quality 2.4 GHz 8dBi outdoor Diversity/MIMO/802.11n panel Antenna on sale of Tesswave Communications LTD from China. The Yves MAGUER WiFi Web Page click here for more. Download: Available on the App Store Available on Android. RP-SMA wp543 build 13102 20091017 needs DD-WRT activation MMJ5N?

  • Badland.co.uk - Latest Tweet
  • Personal Bests V5 (LEADERBOARDS) [Archive] - Page 3
  • 8dBi 2.4GHz 5.8GHz Dual Band Omni-directional WiFi RP-SMA
  • Supported Devices - DD-WRT Wiki
  • 8dBi RP-SMA Dual Band 2.4GHz 5GHz 5.8G + 2 x M.2 IPEX 4
  • Best value Wifi Antenna 8dbi – Great deals on Wifi Antenna
  • Exertis Product Catalogue - Aug to Oct 2020 by ...
  • Exertis Product Catalogue - May to July 2020 by
  • My book live firmware upgrade

1.3Ghz 400mW or 800mW

2G / 3G Omnidirectional Outdoor Antenna

Due to popular demands of our 14dBi High Gain Panel Antenna, this is an alternative choice and yet a better choice if your wireless AV receiver is mainly using 1280Mhz (a legal channel in some countries). Fast and free shipping free returns cash on delivery available on eligible purchase. Notify me when this is in stock. Video Receiver Antennas.

NoCompTV: Le Blog qui Deblog! eyesight on a tragic world

Laird Technologies IAS S2408MD12NF: ANT DIR CEILING MT 8DBI 12" NFEM: Jump to: CAD Modles: Specifications. The antenna has an N female socket. We offer antennas of different manufactures like Andrew, Gabriel, PCTel, Laird, RadioWaves, MARS, MTI, Til-Tek and many more. Quality: Value: Write your own review.

1.85-1.99 GHZ 8DBI PCS BASE ANTENNA - Car Antennas For Sale

2 x 9dBi 2.4GHz 5GHz Dual Band RP-SMA Antennas for TP-Link. Multi-Touch touchscreen, 1024 x 600, 1.3GHz Quad Core, Android 4.4 with OTA to 5.0, 8GB on board, 1GB DDR3, Bluetooth 4.0, Wi-Fi 802.11b/g/n, GPS, Micro-SD, HDMI, 0.3MP front camera / 2.0MP rear. Chameleon Antenna 7.0-54.0 MHz CHA WINDOM 40 March 20, 2020 No comments. Buy 146200-0001 - Molex - Omni-directional Antenna, Full LTE SMT, 1.71GHz to 2.7GHz, 3.8dBi, 50ohm, Linear Polarisation, SMD.

Amazon.com: 2.4 / 5.8GHz / 2 dBi @ 2.4GHz, 3 dBi at 5Ghz

Order before 8pm EST Standard Shipping (Mon – Fri. AOMWAY 5.8GHz Triple Feed 8dbi Patch Antenna (LHCP And https://vipweb-portal.ru/download/?file=722. Road Xiagang Chang'an DG, GD, CN +86 13556688309. Use single quotes (') for phrases.

Hack high-Gain 8dBi 2.4GHz Outdoor WiFi Antenna

We also supply specially made up leads and RF connectors and undertake bespoke antenna design work, toolmaking injection moulding for bespoke projects also assembley work undertaken. How much better range? MINI Omni Directional Multipoint applications. UNLOCKED - never locked.

12 Wireless Router Antenna Distance Coverage Comparison

WiMAX, WiFi Wireless Video Systems. We manufacture many styles of antennas including: Yagi, Base Stations, Dipoles, Mobile Antennas, Portable Antennas, Covert Antennas. Model: OS-242508-NF Applications: 2.4GHz-2.5GHz ISM Band. Come on now, that's awful!

Registration key practical Wireless December 2020

Solwise - Poynting 5-in-1 MIMO 2xLTE, 2xWiFi, 1xGPS MIMO-3. Additional quantities will. Hello, Sign in. Account & Lists Account Returns & Orders. 5.8ghz outdoor 8dbi omni directional antenna-1-5G 4G LTE.

Patch cisco Aironet 8-dBi Omnidirectional Antenna (AIR-ANT2480V-N)

Manufacturer: Laird Technologies IAS. Page 117-Cool 1.2-1.3Ghz Tx/Rx All infos on one page - updated: 27/10/2020 FPV Talk. The 3G omni antenna can be used outdoors without any problems. Thanks to sim io for sending me his 1.3 GHz patch, we now know that the 1.3GHz L-com patch (part# AN1308) is utter garbage.

Full text of "73 Magazine (February 1995)"

Once you know, you Newegg!. China 2.4-5GHz MIMO Omni Antenna with 2.4GHz system, Find details about China 5150-5850MHz Omni Antenna, 8dBi Gain Omni Antenna from 2.4-5GHz MIMO Omni Antenna with 2.4GHz system - ZHENGZHOU LEHENG ELECTRONIC TECHNOLOGY CO, LIMITED. Includes vertical tilt adjustment up to 45 deg. 1.2GHz 8dBi Y Shape Dipole Receiver UAV FPV Antenna for.

Z490 ITX Guide

Z490 ITX Guide

Build Guide

Maximum details including showing step-by-step assembly and installation of components:
https://docs.google.com/document/d/1XeUu0YcV2JjsxzpEYQL7mAyqkdN7Q0TTLC6gSsfxzC4
Includes BIOS settings, semi-verbose Opencore config.plist settings, and USB port mapping.
----------------------------------------------------------------------------------------------------------------------------------------------------

Pictures

https://preview.redd.it/2sin5x7z71f51.png?width=698&format=png&auto=webp&s=490a76872084717cad2777331f2d9ee17a7c12a3
https://preview.redd.it/23lqjq4z81f51.jpg?width=4032&format=pjpg&auto=webp&s=f45d0b474919b02696e2f0239ae4d26ccc92256a
https://preview.redd.it/r9rtybg091f51.jpg?width=4032&format=pjpg&auto=webp&s=2e62652b5f95299211ecb71950ceedfbf195ec5b
https://preview.redd.it/yepvrnq191f51.jpg?width=4032&format=pjpg&auto=webp&s=afae805cdaa9bc9acffeb219cbb78930d3556e85
https://preview.redd.it/r9mxlqt591f51.jpg?width=4032&format=pjpg&auto=webp&s=9078a5e6593743b79e7a5d2275cfc67d923e1e22
https://preview.redd.it/946b4si791f51.jpg?width=4032&format=pjpg&auto=webp&s=5e3d0fd0b13f2bdbf20ef8b2527b126dbf3605d7
----------------------------------------------------------------------------------------------------------------------------------------------------

Background

Welcome to Papadiche's Z490 Hackintosh Guide!
I'm a professional music producer and audio engineer who requires an immense amount of computing power. My finalized sessions routinely run 200+ tracks, of which 50+ are virtual instruments, with over 800+ plugins. My preferred DAW is Logic Pro X, but I also use REAPER, Ableton Live, and Pro Tools (rare for me).
I built my first Hackintosh in 2009, using an incredibly corrupted version of Snow Leopard. Though I produced an EP on that machine, it was anything but stable. In 2013 I joined Clean Team and bought a maxed-out Late 2013 MacBook Pro. That became my new professional machine until retirement in early 2018 when I rejoined Shadow Team: Intel i7-7700K / ASRock Z270 Fatal1ty Gaming ITX/ac / 32GB 2400MHz RAM / nVidia GTX 760 2GB. The increase in performance was immediate and substantial. When working with clients, I had total confidence that we could get through our recording sessions without System Overload warnings and crazy temperature throttling. While this was true during general production, projects later in development would consistently max out the processor. Two years later, I upgraded: Intel i9-9900K / ASRock Z390 Phantom Gaming ITX/ac / 64GB 3200MHz RAM / Sapphire Pulse RX 5600 XT 6GB. Oh man the ceiling has been raised! And yet... still about 50% of my projects overload when they're in the final rendering stage. Okay one more upgrade...
----------------------------------------------------------------------------------------------------------------------------------------------------

Motherboard Selection

Model Good ACPI CNVI Unlocked Good VRMs C14S Fit Wi-Fi Fit
ASRock Z490M-ITX/ac ✔️ ✔️ ✔️
ASRock Z490 Phan ITX/TB3 ✔️ ✔️ ✔️ ✔️ ❌ (flex?)
Gigabyte Z490I ITX ✔️ ✔️ ✔️ ✔️
ASUS Rog Strix Z490-I ✔️ ✔️ ✔️ ✔️
MSI MEG Z490I Unify ✔️ ✔️ ✔️
Only ITX sized motherboards were considered since I re-used my NCase M1. Considering I required both M.2 slots for M.2 SSDs, having an unlocked CNVI Wi-Fi port was a must. This narrowed my search down to only the ASRock boards. Of the two, I read that not only does the Z490M not have good VRMs, but its CPU socket is also located 10mm further north than on the Z490 Phantom Gaming ITX/TB3... this meant the top panel of the NCase M1 wouldn't close with an NH-C14S installed!
The choice was made for me: ASRock Z490 Phantom Gaming ITX/TB3
Note: If you want Thunderbolt 3 support in the ITX form factor, only the ASRock Z490 Phantom Gaming ITX/TB3 and MSI MEG Z490I Unify have TB3 onboard. Both use the full-width 40Gbps, full-power 2.4W Intel JHL7540 TB3 chip. CaseySJ on tonymacx86 has proven this chip to be extremely well supported on macOS and has nearly-native capabilities including hotplug. Check out his posts for more details!
----------------------------------------------------------------------------------------------------------------------------------------------------

Hardware

Optional:
Do note that the BCM94360CD has MHF2 connectors whereas the BCM94360CS2 has MHF4 connectors. They are different sizes and not interchangeable! MHF2 is a somewhat non-standard connector for PC Wi-Fi cards, whereas MHF4 is the standard laptop connector for mobile Wi-Fi cards. The antennas linked above contains MHF2 cables and therefore work perfectly with the BCM94360CD; if you opt to go with a different Wi-Fi card, double-check its connectors and triple-check the Wi-Fi antenna cables and connectors to make sure they fit!
----------------------------------------------------------------------------------------------------------------------------------------------------

Things that don't work 100%:

  • FAT32-formatted USB storage devices do not reconnect after Sleep, even with the Jettison app installed.
  • All other USB storage devices require the Jettison app installed to eject correctly. I have confirmed that having RAM clocked above 2133MHz, such as enabling an XMP Profile in the BIOS, has no effect on USB storage devices ejecting incorrectly with Sleep. I was only able to get USB storage devices to eject properly when the RAM was set to the XMP profile with over-voltage of 1.40v and clock-capped at 1600MHz. Using any of the standard, stock RAM profiles resulted in incorrect ejection, as did the unedited XMP profile.
----------------------------------------------------------------------------------------------------------------------------------------------------

Things that work 100%:

  • Shutdown
  • Restart
  • Sleep (Recommended: Disable Power Nap)
  • Native NVRAM
  • Audio
  • USB Sleep ejection and remounting (with Jettison app)
  • Thunderbolt 3
  • All USB Ports
  • Wi-Fi
  • Bluetooth
  • Ethernet
  • iCloud
  • iMessage
  • AirDrop
  • Continuity
  • Handoff
  • Dark Mode
  • Find My Mac
  • 8K Video Playback
  • Starcraft 2
  • Netflix DRM
----------------------------------------------------------------------------------------------------------------------------------------------------

Overclock

https://preview.redd.it/9559yj047uh51.jpg?width=1920&format=pjpg&auto=webp&s=53dc42c4aedaad1d3357e015d321a286a0e56dec
Considering the Intel i9-10900K is notorious for being an overclock-able CPU, I tried every combination imaginable with Fixed Voltage and eventually wound up with the highest scores and best thermals with the following settings changed from stock:
2 Cores @ 5.3GHz
10 Cores @ 5.0GHz
AVX Offset : Auto
Cache Ratio : 4.5GHz
FCLK Frequency : 1GHz
CPU Tjunction Max : 100
Max Long Power : 200
Long Duration Maintained : 128s
Max Short Power : 350
Max Amps: 255.75
VCore : Auto
LLC : Level 3
DRAM Voltage : 1.400v
RAM Profile : XMP Profile 1
RAM Frequency : 3600MHz
RAM Timings : CL 18-22-22-38
These settings raised the CPU's Cinebench R20 scores by 15-20%, and the CPU's Geekbench 5 scores by 10-15%. Thermals were increased by about 5C over stock in most working scenarios. VCore is 1.32v average over 2+ hours of benchmarking. VCore jumps to ~1.43v for very short periods of time. Cache Ratio (frequency) is rock solid at 4.5GHz, reasonably stable at 4.6GHz, unstable at 4.7GHz, and refuses to boot at 4.8GHz.
Update 2020-08-10: I ended up reducing some of the frequencies and instituting an AVX Offset of -3 after lots of stress testing and two weeks of work. Very occasionally (about once every 100 uptime hours) macOS would lockup and the front power light would alternate blue and red flashing. According to the motherboard's manual this means the CPU or RAM has hit a fault/error. In my case, that means the Overclock was too aggressive in some random aspect(s). I've updated the settings in this post to reflect my most recent BIOS. Hopefully we're all stable now! I will further update/tweak if system instability continues to be an issue.
Update 2020-08-18: Seven (7) full days of uptime including Sleep for 8+ hours every night. Perfect stability through multiple nights of benchmarks, continuous and strenuous workloads, and multiple nights of Sleep. Removed any AVX Offset and reset to 2 Cores @ 5.3GHz and 10 Cores @ 5.0GHz. Average 1.33v over 10 hours of stress testing. For more information, screenshots, and a BIOS .BIN load file, check out the Google Docs link at the top of the guide!
----------------------------------------------------------------------------------------------------------------------------------------------------

Geekbench 5 Benchmark

https://browser.geekbench.com/v5/cpu/3252163
https://preview.redd.it/exahymut7uh51.png?width=717&format=png&auto=webp&s=1da5d3771236822f8ccdbae411ad1297f5358c81
CPU Single Core Score Multi-Core Score
Intel i9-10900K 1470 11300-11700 (4.8GHz to 5.1GHz)

https://browser.geekbench.com/v5/compute/898838
https://preview.redd.it/a39gl6nx7uh51.png?width=709&format=png&auto=webp&s=9ce94fd0570bdffa5cfb5d4e320ed0ab2fe06af7
GPU Metal OpenCL
Sapphire Pulse RX 5600 XT 61000 52000
----------------------------------------------------------------------------------------------------------------------------------------------------

Cinebench R20 Benchmark

CPU Score
Intel i9-10900K 6550-6700 (4.8GHz to 5.1GHz)
----------------------------------------------------------------------------------------------------------------------------------------------------

Logic Pro X Performance

200 Tracks with the standard NewLogicBenchmarkTest. No thermal issues as the CPU peaks at around 85C.
CPU Number of Tracks
13" MacBook Pro 14
15" MacBook Pro 35
iMac18,3 100
2013 Mac Pro 110
Intel i9-9900K 158
Intel i9-10900K 190-201 (4.8GHz to 5.1GHz)
2019 Mac Pro (3.2GHz 16-Core) 310
In normal use I can render 300 Tracks with 800+ Plugins and 500 Voices (from Virtual Instruments) at 75% CPU load and 65C with around 38dB of fan noise. Quiet enough to where the computer could be in the vocal booth, and minimal-to-zero noise would be heard through the microphone. Very happy!
----------------------------------------------------------------------------------------------------------------------------------------------------

Temperatures

CPU temperatures are better than any other case I've used! When under >75% heavy processing for extended periods of time, the CPU hits 80C with the fans running at full speed. For normal workloads, the CPU temperature will top out at ~70C with fans running at 50% speed.
Idle: 40 C Load: 70 C Max: 100 C
GPU temperatures peak at 60C under Geekbench 5 testing, and 65C while rendering 8K video. While I originally have the GPU connected to the bottom case fan nearest the front panel via CRJ to 4-Pin PMW Adapter, I found that it rarely spun due to the Fan Stop feature in the GPU's BIOS. I have since used another 4-pin PWM Y-Splitter off the "CPU OPT" fan header to permanently spin the front case fan.
Idle: 35 C Load: 60 C Max: 70 C
----------------------------------------------------------------------------------------------------------------------------------------------------

Noise

https://preview.redd.it/dyjiuw848uh51.jpg?width=1920&format=pjpg&auto=webp&s=d5d8be001fa3116ea925a21579c1ab4fb50ff9fa
In the BIOS, I set up identical custom fan profiles for the "CPU FAN," "CPU OPT," and "CHASSIS" outputs. VR Fans are set to the "Silent" profile. In my case, I have the "CPU FAN" connected to the Noctua NF-A12x25 intake fan on the Noctua NH-C14S CPU Cooler, the "CPU OPT" connected to the 2x Noctua NF-A12x15 intake fans mounted on the side panel/radiator rail + the bottom front case Noctua NF-A12x25 exhaust fan, and and the "CHASSIS" connected to the rear Noctua NF-A9 exhaust fan + the bottom case Noctua NF-A14 exhaust fan (which comes originally installed on the Noctua NH-C14S). The custom fan profile is as follows:
Temperature 1 : 20
Fan 1 % : 20
Temperature 2 : 50
Fan 2 % : 30
Temperature 3 : 60
Fan 3 % : 40
Temperature 4 : 70
Fan 4 % : 50
Critical Temperature : 80
This fan profile provides the same thermals as the Performance settings but at lower noise levels than the Silent settings. Full Speed results in a 5C CPU temperature reduction across the board, and eliminates any thermal throttling. The CPU will throttle on the consecutive runs of Cinebench R20 with my custom fan profile. For me, that's acceptable since in real-world use thermal performance is plenty acceptable.
At idle, the fans are whisper quiet at around 35dB. For normal 50% CPU loads, the fans spin up to around 38dB. Under difficult process loads, the fans spin as loud as 43dB, and for absolutely all-out maximum 100% CPU loads, the fans get up to a loud 50dB. Unless you are cryptomining or rendering long movies/videos through the CPU, your fans will stay in the "whisper quiet" to "reasonably quiet" range. Pushing the computer to be "loud" was something I did simply to ensure it would typically stay quiet, and to verify how loud it would get if somehow pushed to maximum loads.
----------------------------------------------------------------------------------------------------------------------------------------------------

Install EFI Creation

Use the standard, up-to-date Opencore guide: https://dortania.github.io/OpenCore-Desktop-Guide/
Audio and Ethernet were particularly tricky, and not covered in the Opencore guide.
AUDIO One BIOS change and one edit in config.plist are required for perfect audio:
BIOS -> Advanced -> Chipset Configuration -> Onboard HD Audio : Enabled ( do not leave as "Auto" but do leave Front Panel : HD )
... DeviceProperties Add PciRoot(0x0)/Pci(0x1F,0x3) layout-id Data 0B000000 ... ... ... 
ETHERNET Ethernet requires the LucyRTL8125Ethernet.kext since ASRock went with a Realtek 8125 chip instead of a standard Intel chip for Ethernet support. Within config.plist add the appropriate Kext entry:
... Kernel Add BundlePath String LucyRTL8125Ethernet.kext Enabled Boolean True ExecutablePath String Contents/MacOS/LucyRTL8125Ethernet PlistPath String Contents/Info.plist ... ... 
Make sure you install the appropriate kext ( LucyRTL8125Ethernet.kext ) within your EFI folder and Ethernet should appear under System Preferences -> Network! Then you'll need to select Ethernet, click Advanced, click Hardware, and Select Configure : Manually with Speed : 1000baseT and wired internet should connect. With Configure : Automatically selected, as is default, wired internet will not connect. Verification can be made by viewing the Ethernet port on the back of the motherboard and inspecting the lights; no lights on means the port is not active.
https://preview.redd.it/d48fcrnp71f51.png?width=780&format=png&auto=webp&s=1ea01f7b15765759fe783d684773eacefb89b37c
Aside from Audio and Ethernet, follow the Opencore guide exactly and you'll be golden!
My short-hand guide with settings specific to this exact hardware configuration can be viewed at the Google Doc Build Guide link above. USB port mapping is also covered in the Build Guide.
----------------------------------------------------------------------------------------------------------------------------------------------------

Daily EFI Creation

Starting from the above EFI, do the following:
SSDT EDITS/ADDITIONS
ACPI

... ACPI Patch Comment String Rename PEGP to EGP0 (Graphics) Enabled Boolean True Find Data 50454750 Replace Data 45475030 TableSignature Data 45475030 ... ... ... 
BOOT-ARGS
DEVICEPROPERTIES

... DeviceProperties Add PciRoot(0x0)/Pci(0x14,0x3) acpi-wake-type Data 01 ... ... ... 
KERNEL
  • Under Quirks -> XhciPortLimit : NO
MISC
KEXTS
PLATFORMINFO

Here is how your EFI folder should look when all finished:
https://preview.redd.it/ht3xrln381f51.png?width=821&format=png&auto=webp&s=26254a7cb8866306fa855db343c58bb0f03b7e44
----------------------------------------------------------------------------------------------------------------------------------------------------

Improvements

Improvements
  • None at the moment! :)
----------------------------------------------------------------------------------------------------------------------------------------------------

My Songs Made On Hackintosh

----------------------------------------------------------------------------------------------------------------------------------------------------
Previous 9900K Build : https://www.reddit.com/hackintosh/comments/gl8xrv/i99900k_64gb_3200_rx_5600_xt_silent_imac_pro/
Permalink to most recent Papadiche build: http://www.papadiche.com/computer
submitted by papadiche to hackintosh

[FS][US-CO] Dell Optiplex Micro USFF Computers

Looking to clear a few more Optiplex USFF computers.
Dell Optiplex 3060 Micro USFF Desktop Computer
  • CPU: Intel i5-8500T, 6-core, 2.1Ghz, 3.5Ghz Boost, 35W TDP
  • RAM: 8GB DDR4-2666 SODIMM (1x8GB)
  • DRIVE: 256GB NVME SSD
  • NETWORK: Gigabit Ethernet, Intel 802.11ac WiFi
  • OS: Window 10 Pro clean Dell Install
  • Ports: 1x Displayport, 1x HDMI, 4x USB 3.1, 2x USB 2.0
  • Comes with Computer, 65W Power Adapter, WiFi Antenna
  • Pics: https://imgur.com/a/yf5hg39
  • $325 shipped within the CONTUS
  • SOLD TO u/phidauex
Dell Optiplex 7060 Micro USFF Desktop Computer
  • CPU: Intel i5-8500T, 6-core, 2.1Ghz, 3.5Ghz Boost, 35W TDP
  • RAM: 8GB DDR4-2666 SODIMM (1x8GB)
  • DRIVE: 256GB NVME SSD
  • NETWORK: Gigabit Ethernet, Intel 802.11ac WiFi
  • OS: Window 10 Pro clean Dell Install
  • Ports: 2x Displayport, 5x USB 3.1, 1x USB-C
  • Comes with Computer, 65W Power Adapter, WiFi Antenna
  • Pics: https://imgur.com/a/74WEdNo
  • $330 shipped within the CONTUS
  • SOLD TO u/celestrion
Dell Optiplex 7070 Micro USFF Desktop Computer
  • CPU: Intel i7-9700T, 8 core, 2Ghz, 4.3Ghz Boost, 35W TDP
  • RAM: 8GB DDR4-2666 SODIMM (2x4GB)
  • DRIVE: 256GB NVME SSD
  • NETWORK: Gigabit Ethernet, No Wifi
  • OS: Window 10 Pro clean Dell Install
  • Ports: 2x Displayport, 1x HDMI, 1x USB-C, 5x USB 3.1
  • Comes with Computer, 90W Power Adapter
  • Pics: https://imgur.com/a/ruHGh5d
  • $550 shipped within the CONTUS
  • SOLD TO u/HardKSound
Dell Optiplex 3060 Micro USFF Desktop Computer - 1
  • CPU: Intel i5-8500T, 6-core, 2.1Ghz, 3.5Ghz Boost, 35W TDP
  • RAM: 8GB DDR4-2666 SODIMM (1x8GB)
  • DRIVE: 256GB NVME SSD
  • NETWORK: Gigabit Ethernet, Intel 802.11ac WiFi
  • OS: Window 10 Pro clean Dell Install
  • Ports: 1x Displayport, 1x HDMI, 4x USB 3.1, 2x USB 2.0
  • Comes with Computer, 65W Power Adapter, WiFi Antenna
  • Pics: https://imgur.com/a/dBh8zrV
  • $325 shipped within the CONTUS
  • SOLD TO u/ChicagoAdmin
Heatware: https://www.heatware.com93/to
Plenty of feedback on hardwareswap
I'm in Denver, CO for local offers. If we are doing a local deal you must have a mask, and so will I.
Reply to this thread before sending a DM.
submitted by aimark42 to homelabsales

0 thoughts on “Shadow fight hacker 1.0 without surveys

Leave a Reply

Your email address will not be published. Required fields are marked *